Elegance in Iron designs, fabricates and installs custom wrought iron driveway gates for Melbourne homes. Choose a swing gate where the driveway has sufficient opening clearance, or a sliding gate where slope, setback or vehicle space makes a swing arc impractical.
Manual and automated systems are available. Each gate is measured and specified for the opening, site conditions, design, finish and access-control requirements.
Get A Free Quote
Explore swing, sliding, traditional and contemporary wrought iron gate styles. Each design can be adapted to the property opening, architecture, privacy preferences and automation requirements.
A balanced two-leaf design that opens from the centre and creates a traditional formal entrance. This configuration can suit level driveways with sufficient inward clearance for both gate leaves.
A rising centre arch gives this design a more prominent entrance profile. Decorative openwork maintains visibility through the gate while creating a strong visual connection with traditional façades and masonry piers.
Curved scrolls and ornamental details give this gate a heritage character. The open pattern can complement Victorian and Edwardian architecture while allowing more airflow than a fully infilled gate.
Straight lines and restrained geometric details create a cleaner, contemporary appearance. This style can suit modern homes where visual simplicity is preferred over traditional ornamental scrollwork.
A sliding configuration moves parallel to the front boundary instead of occupying the driveway with a swing arc. It requires adequate side return, suitable supports and a correctly prepared travel path.
Decorative iron framing can be combined with closer-spaced elements or backing panels to reduce visibility from the street. Additional infill increases wind load and must be considered when specifying posts, hinges and automation.
Vertical bars and spear-style finials create a defined traditional profile. The open construction preserves visibility through the entrance and can be coordinated with matching wrought iron fencing.
A single gate leaf provides a simple opening arrangement where the post, hinge structure and available swing space can support the complete gate. Width, weight and wind exposure must be assessed before fabrication.
Flowing curves, leaf forms and symmetrical scrollwork create a softer ornamental character. This style can complement rendered walls, stone columns and homes with Mediterranean or European architectural details.
A central crest, initial or custom decorative motif can create a more individual entrance. The artwork must be incorporated into the structural gate design without interfering with hardware or operation.
Evenly spaced vertical elements create a restrained design with clear sightlines through the entrance. The simple geometry can work with both contemporary homes and understated traditional façades.
Decorative wrought iron gates can be combined with remote, keypad or intercom access. Motor capacity, supports, safety devices and operating geometry must be specified for the completed gate and installation site.
The correct configuration depends on available movement space, driveway slope, vehicle position, supporting posts and automation requirements.
| Site Factor | Swing Gate | Sliding Gate |
|---|---|---|
| Movement | Opens inward or outward through an arc. | Moves sideways parallel to the front boundary. |
| Space Required | Needs clear space through the complete swing arc. | Needs sufficient side return beyond the driveway opening. |
| Driveway Slope | Works best where the gate has adequate ground clearance through the complete opening path. | Can avoid an uphill swing conflict, but side return, crossfall and track alignment must still be assessed. |
| Automation | Requires an operator for each moving leaf; double gates normally use two operators. | A standard single sliding gate normally uses one sliding operator. |
| Ground Conditions | Posts, hinges and foundations carry the gate load. | Track systems require a suitable travel surface; cantilever systems require additional support and lateral space. |
| Starting Point | Level driveway with sufficient inward setback. | Limited driveway depth with adequate side return. |
Give us a call at 0450 01 01 01 to speak with us directly between 10 am to 4 pm Tuesday – Saturday or send an email to info@eleganceiniron.com.au. If you have any questions or concerns, we’ll do whatever we can to address them.
Swing gates are hinged to steel posts or masonry piers and can be manufactured as a single leaf or a pair of leaves meeting in the centre.
A sloping driveway may require altered geometry, specialised hinges or a different opening direction. Suitability must be confirmed during the site measure.
Sliding gates travel parallel to the boundary, preserving driveway depth and avoiding the clearance needed for a conventional swing arc.
Cantilever systems stay clear of the driveway surface but require a counterbalance section and additional lateral space.
Swing and sliding wrought iron gates can be automated when the motor, gate structure, supports and safety devices are specified as one system.
Preliminary measurements and photos help identify a suitable gate configuration. Final fabrication dimensions must be verified during a professional site measure.
Every gate is quoted for its opening, design, finish, automation and site conditions. The figures below are indicative starting points rather than fixed project prices.
| Gate Configuration | Indicative Starting Price |
|---|---|
| Manual single swing driveway gate | From AUD $2,500 |
| Manual double swing driveway gate | From AUD $4,500 |
| Sliding driveway gate | From AUD $5,000 |
| Ornate or fully custom design | From AUD $8,000 |
| Automation package | From AUD $1,500 additional |
These illustrative scenarios show how swing, sliding and automated wrought iron gates may be specified for different driveway conditions. They are planning examples, not completed Elegance in Iron projects.
This configuration divides the opening between two gate leaves. It can suit traditional façades where the driveway remains clear through the complete inward swing arc.
This configuration preserves driveway depth by moving parallel to the boundary. The track, drainage, side return and travel surface would require confirmation during the site assessment.
This example combines decorative openwork with automated access. Final motor capacity, hinges, safety devices and supports would be specified from the completed gate weight and site conditions.
Send the property suburb, entrance photos, approximate opening width and preferred design.
Confirm the opening, posts, slope, travel space, services and automation requirements.
Define the configuration, visual design, finish, hardware, automation and quote inclusions.
Verify fabrication dimensions and approve the final gate design before production.
Manufacture the gate and apply the specified protective finish.
Install, align and test the gate, controls, automation and applicable safety functions.
Automated gate systems should be designed and installed with reference to current manufacturer instructions and applicable Australian requirements, including AS/NZS 60335.2.103 for drives used with gates, doors and windows.
Reference: Standards Australia
Requirements vary by property and local council. Heritage overlays, front-fence controls, street boundaries and changes to vehicle access can affect whether approval is required.
Reference: Victorian Government planning guidance
A swing gate generally suits a driveway with enough clear opening arc and suitable ground clearance. A sliding gate suits sites where preserving driveway depth is important, provided sufficient side return is available. Slope, posts, wind, drainage and vehicle position must also be assessed.
Yes. Swing and sliding gates can be automated when the motor, gate weight, hinges, posts, foundations, travel resistance and safety devices are specified as one system.
A sliding gate needs clear side return for the complete moving panel and its supporting hardware. Cantilever systems require additional counterbalance length. The required space must be calculated from the final gate and hardware design.
Sometimes. Suitability depends on the direction and amount of slope, ground clearance, opening direction and hinge design. A site assessment is required before selecting the configuration.
Current indicative starting prices are AUD $2,500 for a manual single swing gate, AUD $4,500 for a manual double swing gate and AUD $5,000 for a sliding gate. Final pricing depends on dimensions, design, finish, automation, electrical work and installation conditions.
Requirements vary by council, planning zone, heritage controls, fence height and whether vehicle access changes. Confirm requirements with the relevant local council before fabrication.
Give us a call on (03) 9809 1936 or 0450 01 01 01 to speak with us directly or send an email to info@eleganceiniron.com.au. If you have any questions or concerns, we’ll do whatever we can to address them.
A selection of our designs are on display at our Melbourne showroom 1367 Malvern Rd Malvern, so pop in between 10 am and 5 pm from Monday to Friday or 10 am to 3 pm on Saturday to get a better idea of what we can offer along with professional advice from one of our experienced team members. We also take bookings for Sunday consultations—contact us to make an appointment.
Send your Melbourne suburb, entrance photos, approximate opening width and preferred swing or sliding configuration. These details support the initial design discussion and site-measure planning.
